Coosada, AL - 1015 - Operator Equipment - Heavy 2

Coosada, AL - 1015 - Operator Equipment - Heavy 2

Operate one or several types of power construction equipment (i.e. track loader, dozer, backhoe, excavator, scraper, grader, side boom, boring machine, RT Extended boom forklift, etc.); to excavate, move and/or grade material.

Operate gasoline, diesel, pneumatic or electric powered equipment to move objects or material according to project specifications. Assemble and operate compressors and pumps; operate levers and pedals on assigned equipment to lower bucket or scoop up material and to lift, swing, or dump material; adjust hand wheels and depress foot pedals to drive machines and control attachments, such as blades, buckets, scrapers and swing booms. Perform light maintenance duties such as cleaning, greasing and oiling machines. Document maintenance logs on assigned equipment. Perform daily inspections of equipment and document results on daily log. Coordinate machine actions with other activities, positioning or moving loads in response to hand or audio signals from crew members. Load and move dirt, rocks, equipment, or other materials, using trucks, crawler tractors, shovels, graders, or related equipment. Check fuel supplies at sites to ensure adequate availability. Drive and maneuver equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation, or rocks or to distribute and level earth or terrain. Calculate slopes and grades of materials. Have a working knowledge of Trenching and excavating requirements and regulations. Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects. Locate underground services, such as pipes or wires, prior to beginning work. Understand and implement Red Tag procedures relating to equipment in a safe manner. Must have in his/her possession an OCI Equipment Qualification card endorsing the unit being operated. Follow Load capacity charts and assure proper equipment support based on equipment capacity and type. Observe the travel of all loads and take appropriate action to avoid injury to personnel or damage to property. Participate in all safety related processes and programs as requested. Engage with your work team to ensure we achieve zero injuries. Understand that no job is so important that your safety and that of your crew will be compromised. Watch for hazards and report any concerns to your supervisor or safety professional. If needed, use your stop work authority until the issue is resolved. Report all accidents and near misses to supervisor; participate in investigation process as needed. Participate in all pre?job work planning and safety discussions. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate and/or mitigate hazards. Understand and respond appropriately to all safety hazards and warning devices (i.e. back?up alarms, smell of smoke, different colored warning tags, warning sirens). Follow established safety rules and regulations and maintain a safe and clean work environment. Use effective verbal and written communication skills. Add, subtract, multiply and divide whole numbers and fractions rapidly and accurately.

3+ years or 6,000 hours of working experience as an equipment operator and a strong working knowledge of the operating and rigging crafts is required. Must have working knowledge of the operating limitations and safe work practices associated with each piece of equipment being operated. A copy of the executed Medical Examiner's Certificate must be on file before any operation begins. Commercial driver's license is required when the equipment will be operated on public roads. Must be at least 18 years of age.